2Wire Router
Complete guide to setup and manage your 2Wire gateway device
Default Access Methods
Default IPs
Primary: 192.168.1.1
Alternative 1: 192.168.0.1
Alternative 2: 192.168.1.254
Alternative 3: 10.0.0.138
Alternative 4: 10.0.0.1
Default Username
None required (usually)
Default Password
Located on gateway label (System Password Key)
Popular 2Wire Models
AT&T DSL Series
- 2701HG-B - ADSL2+ Gateway
- 2701HG-D - DSL Gateway
- 2wire 2700HG-B - Basic DSL
Advanced Series
- 3800HGV-B - Dual Band Gateway
- 3801HGV - Advanced Gateway
- 3600HGV - U-verse Gateway
Legacy Models
- 1000 Series - Basic Gateway
- 1701HG - Standard DSL
- 2500 Series - Mid-range DSL
Setup Guide
1
Physical Setup
- Connect power adapter
- Connect DSL/phone line
- Wait for Broadband light
- Check for Internet light
2
Gateway Access
- Connect to default WiFi
- Visit gateway.2wire.net
- Or use default IP address
- Enter system password key
3
Network Setup
- Configure WiFi settings
- Set network password
- Enable wireless security
- Set up firewall options
Key Features
Wireless-N
802.11n wireless support
Security
Built-in firewall and WPA2
DSL Modem
Integrated ADSL2+ modem
Home Network
Device management tools
Common Issues & Solutions
No Internet
- Check DSL connection
- Verify phone line filter
- Check broadband light
- Power cycle device
Factory Reset
- Locate reset button
- Hold for 15 seconds
- Wait for lights to cycle
- Device will reboot
Password Recovery
- Check device label
- Look for system key
- Contact AT&T support